Changes to Step #1
Edit by Walter Galan —
Edit approved by Walter Galan
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following screws securing the battery connector to the logic board: | |
| [* red] One 1.7 mm Phillips screw | |
| - | [* orange] One 1.5 mm Phillips screw. |
| + | [* orange] One 1.5 mm Phillips screw. |
| [* black] Use a plastic opening tool to gently detach the battery connector from the device. | |
| + | [* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This may come loose while prying the battery connector from its socket. |
Image 1
Old Version
New Version