Skip to main content

Changes to Step #32

Edit by Jake Devincenzi

Pending approval

Before
After
Unchanged

Step Lines

-[* black] There are likely large burrs (shredded plastic bits) on the edges of your case from cutting it open. For ease of joining the case halves, it is recommended that you smooth the edges by de-burring them. A dremel tool with a sanding bit, a sanding block or a knife will work for this process.
+[* black] There are likely large burrs (shredded plastic bits) on the edges of your case from cutting it open. For ease of joining the case halves, it is recommended that you smooth the edges by de-burring them. A dremel tool with a sanding bit, a sanding block, or a knife will work for this process.