Skip to main content

Changes to Step #32

Edit by Phillip Takahashi

Pending approval

Before
After
Unchanged

Step Lines

-[* black] There are likely large burrs on the edges of your case from cutting it open. For ease of joining the case halves, it is recommended that you de-burr the edges. We used our handy dremel and a sanding bit.
+[* black] There are likely large burrs (shredded plastic bits) on the edges of your case from cutting it open. For ease of joining the case halves, it is recommended that you smooth the edges by de-burring them. A dremel tool with a sanding bit, a sanding block or a knife will work for this process.