Skip to main content

Changes to Step #6

Edit by Andrew Bookholt

Pending approval


Step Lines

[* black] Using the sharp end of a spudger, disconnect the connector for the blue and white power cables. Again, be careful to pry up only on the connector.
-[* black] Lift the upper case enough to disconnect the blue and white power cable from the logic board. Using your fingernails or a dental pick, carefully pry the connector from its socket. Make sure you're pulling only on the connector and not on the socket.
+[* black] The upper case is now free and can be removed from the computer.

Image 1

Old Version

New Version