Skip to main content

Changes to Step #2

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* icon_note] We recommend placing the computer on a soft cloth from this point on to prevent damaging the logic board.
[* black] Turn over the computer and open it.
-[* red] Remove the 3 Phillips screws from the edges of the keyboard area.
+[* black] Use the flat side of a flathead screwdriver to remove the small magnet covering a screw near the middle of the computer.
[* icon_reminder] The shorter screw goes in the lower left corner.

Image 1

No previous image

Added