Skip to main content

Changes to Step #1

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Remove the following 11 screws from the bottom of the computer:
+[* red] Remove the two 3 mm Phillips screws inside the left edge of the battery tray.
[* red] Three 3 mm Phillips around the battery compartment.
[* orange] Three 4.5 mm Phillips along the optical drive bezel. (a magnetic screwdriver may help to lift these screws out)
[* yellow] One 12 mm Phillips in the lower right corner.
[* green] Four 14.5 mm Phillips.

Image 1

No previous image

Added