Menu

Your Settings

Changes to Step #4

Edit by Charley Grove —

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] RemoveUsing a Phillips #2 Screwdriver, remove the 4 Phillips screws from the inverter board and the two Phillips screws holding the wire in place.
[* black] Take away the inverter board away from the case.
[* black] RemoveUsing a Phillips #2 Screwdriver, remove the 4 Phillips screws from the inverter board and the two Phillips screws holding the wire in place.
[* black] Take away the inverter board away from the case.