Skip to main content

Changes to Step #4

Edit by Miles Murphy

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Remove the three 7.69 mm Phillip #2 screws from the inverter board.
[* blackorange] Remove the two 7.69 mm Phillip #2 grounding screws from the wire with the black connector.
[* blackorange] Remove the two 7.69 mm Phillip #2 grounding screws from the wire with the black connector.
[* black] Gently pull the inverter board away from the case.
[* icon_note] Note that the board is still connected to several components by wires.

Image 1

Old Version

New Version

Image 2

No previous image

Added