Skip to main content

Changes to Step #1

Edit by Mackenzie Keane

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] With the monitor facing down, remove the two 5.81 mm PhillipPhillips #2 screws on the right side of the metal casing.
[* orange] With the monitor still facing down, remove the two 5.81 mm PhillipPhillips #2 screws on the left side of the casing.
[* red] With the monitor facing down, remove the two 5.81 mm PhillipPhillips #2 screws on the right side of the metal casing.
[* orange] With the monitor still facing down, remove the two 5.81 mm PhillipPhillips #2 screws on the left side of the casing.
[* icon_caution] Do attempt to pull apart the casing. There are still wires holding the front and back together.