Skip to main content

Changes to Step #1

Edit by Mackenzie Keane

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Remove the pair of 5.81 mm Phillip #2 screws holding the casing together. There are two sets of two screws located on the left and right sides ofholding the casingcasing together.
[* icon_caution] There are still wires attaching the front and back metal casing. Lift the back of the metal casing off of the front. Do not use forceforce to avoid damaging the wires.
[* red] Remove the pair of 5.81 mm Phillip #2 screws holding the casing together. There are two sets of two screws located on the left and right sides ofholding the casingcasing together.
[* icon_caution] There are still wires attaching the front and back metal casing. Lift the back of the metal casing off of the front. Do not use forceforce to avoid damaging the wires.