Skip to main content

Changes to Step #1

Edit by Phil Jones

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Using a Phillips #2 Screwdriver, remove the screws on the metal casing. There will beare two sets of two screws located on each sidethe left and right sides of the casing.
[* red] Using a Phillips #2 Screwdriver, remove the screws on the metal casing. There will beare two sets of two screws located on each sidethe left and right sides of the casing.
[* black] Lift the back of the metal casing off the front.
[* icon_caution] There are still wires attaching the front and back metal casing. Do not use force.