Skip to main content

Changes to Step #1

Edit by Charley Grove

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] RemoveUsing a Phillips #2 Screwdriver, remove the Phiilip screws on the metal casing. There will be two oneachon each side.
[* black] RemoveUsing a Phillips #2 Screwdriver, remove the Phiilip screws on the metal casing. There will be two oneachon each side.
[* black] Lift the back of the metal casing off the front.
[* icon_caution] There willare still be wires attaching the front and back metal casing. Do not use force.
[* icon_caution] There willare still be wires attaching the front and back metal casing. Do not use force.