Skip to main content

Changes to Step #1

Edit by Phil Jones

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] RemoveWith the pairmonitor facing down, remove the two 5.81 mm Phillip #2 screws on the right side of the metal casing.
[* orange] With the monitor still facing down, remove the two
5.81 mm Phillip #2 screws on the left and right sides holdingside of the casing togethercasing.
[* icon_caution] ThereDo attempt to pull apart the casing. There are still wires attachingholding the front and back metal casing. Lift the back of the metal casing off of the front. Do not use force to avoid damaging the wirestogether.
[* red] RemoveWith the pairmonitor facing down, remove the two 5.81 mm Phillip #2 screws on the right side of the metal casing.
[* orange] With the monitor still facing down, remove the two
5.81 mm Phillip #2 screws on the left and right sides holdingside of the casing togethercasing.
[* icon_caution] ThereDo attempt to pull apart the casing. There are still wires attachingholding the front and back metal casing. Lift the back of the metal casing off of the front. Do not use force to avoid damaging the wirestogether.

Image 2

Old Version

New Version