Skip to main content

Changes to Step #3

Edit by John Ford

Edit approved by John Ford

Deleted
Added
Unchanged

Step Lines

[* black] Remove the three screws holding the back cover.
[*
black] Use the Phillips #00 Precision Screwdriver and remove the screw.
[* black] Repeat this process for
screws on the remaining screwsback cover.
[* black] Remove the three screws holding the back cover.
[*
black] Use the Phillips #00 Precision Screwdriver and remove the screw.
[* black] Repeat this process for
screws on the remaining screwsback cover.