Skip to main content

Changes to Step #2

Edit by Scott Head

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Use an iPod opening tool to carefully pry the battery connector up from the ends closest to the top and bottom edges of the iPhone.
[* icon_caution] Do not pry against the contact clip.
[* blackred] Remove the contact clip from the iPhone.
[* black] Before reconnecting the battery connector, be sure the pressure contact (shown in red) is properly positioned next to the battery connector.
[* icon_note] Before reassembly, be sure to clean all metal-to-metal contact points on the pressure contact as well as its contact point on the rear panel with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.
[* blackred] Remove the contact clip from the iPhone.
[* black] Before reconnecting the battery connector, be sure the pressure contact (shown in red) is properly positioned next to the battery connector.
[* icon_note] Before reassembly, be sure to clean all metal-to-metal contact points on the pressure contact as well as its contact point on the rear panel with a de-greaser such as windex. The oils on your fingers have the potential to cause wireless interference issues.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added