Skip to main content

Changes to Step #6

Edit by Phillip Takahashi

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Guide a 12 mm socket with two 10" extensions down onto the bolt.
[* icon_note]
You will need to carefully work the socket and extensions between wires and hoses, being careful not to put too much tension on them.
[* black] Guide a 12 mm socket with two 10" extensions down onto the bolt.
[* icon_note]
You will need to carefully work the socket and extensions between wires and hoses, being careful not to put too much tension on them.
[* black] Turn the bolt counter-clockwise until it completely un-threads.
[* black] Remove the bolt from the engine bay.