Skip to main content

Changes to Step #6

Edit by Phillip Takahashi

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Guide a 12 mm socket with two 10" extensions down onto the bolt. You will need to carefully work the socket and extensions between wires and hoses, being careful not to put too much tension on them.
[* black] Guide a 12 mm socket with two 10" extensions down onto the bolt. You will need to carefully work the socket and extensions between wires and hoses, being careful not to put too much tension on them.
[* black] Turn the bolt counter-clockwise until it completely un-threads.
[* black] Remove the bolt from the engine bay.