Skip to main content

Changes to Step #2

Edit by Phillip Takahashi

Pending approval

Deleted
Added
Unchanged

Step Lines

[* red] Locate the engine air intake unit on the back of the engine.
[* orange] Locate the screw for the hose clamp securing the air intake hose to the engine's air intake unit.
[* black] Loosen the the hose clamp, using a P2Phillips #2 screwdriver, by turning the screw counter-clockwise until the back end of the screw no longer protrudes out of the hose clamp.
[* black] Loosen the the hose clamp, using a P2Phillips #2 screwdriver, by turning the screw counter-clockwise until the back end of the screw no longer protrudes out of the hose clamp.