Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #6

Edit by Walter Galan

Pending approval

Before
After
Unchanged

Step Lines

[* icon_note] Do not yank the upper case off quickly. The case is attached to the logic board via a ribbon cable.
[*
black] Insert wisdom hereLift up at the rear of the case and work your fingers along the sides, freeing the case as you go. Once you have freed the sides, you may need to rock the case up and down to free the front of the upper case.
[* icon_note] Do not yank the upper case off quickly. The case is attached to the logic board via a ribbon cable.
[*
black] Insert wisdom hereLift up at the rear of the case and work your fingers along the sides, freeing the case as you go. Once you have freed the sides, you may need to rock the case up and down to free the front of the upper case.

Image 1

Old Version

New Version

Image 2

Old Version

New Version