Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by mayer

Pending approval

Before
After
Unchanged

Step Lines

[* red] Remove the four 3.2 mm Phillips screws on the port side of the computer.
[* black] Rotate the computer 90 degrees and remove the two Phillips screws from the rear of the computer.
[* black] Rotate the computer 90 degrees again and remove the four Phillips screws from the
side of the computer.
[* red] Remove the four 3.2 mm Phillips screws on the port side of the computer.
[* black] Rotate the computer 90 degrees and remove the two Phillips screws from the rear of the computer.
[* black] Rotate the computer 90 degrees again and remove the four Phillips screws from the
side of the computer.

Image 2

Deleted

Image 3

Deleted