Changes to Step #22
Edit by Kyle Wiens —
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Attach the other end of your new cable to the logic board where the optical drive was connected. |
| + | [* black] Carefully wrap up the extra cable and store it to the side of the hard drive. |
| + | [* icon_reminder] You may want to use cable ties to bundle the excess cable tightly. If you don't stow the cable correctly, it will prevent the case from going back on all the way. |
Image 1
Old Version
New Version