Changes to Step #4

Edit by Aaron Kondziela

Edit approved by Aaron Kondziela

Deleted
Added
Unchanged

Step Lines

[title] The Guts
[* black] Notice the back of the WiFi PCB. There is the female pin-header connector for the LED board, and a series of gold pads for a manufacturing test jig.
[* red] If you are feeling adventurous, you may be able to find JTAG, serial ports, or other fun hacking opportunities among those pads.
[* green] If you remove the two screws, the electrical base unit slides out of the metal heatsink case. The electronics are potted and not easily accessible.
[* black] Re-assembly is the reverse of disassembly.