Changes to Step #2

Edit by Aaron Kondziela

Edit approved by Aaron Kondziela

Deleted
Added
Unchanged

Step Lines

[title] Remove LED PCB
[* black] Removing the diffuser exposes the LED PCB. The edge of the WiFi board can also be seen with the antenna protruding.
[* black] On the LED PCB, you can see the white and colored LEDs. The PCB is a thermally-conductive aluminum material.
[* black] Around the edge of the bulb's case there is a plastic retaining ring attached by four Phillips-head screws. It's not necessary to remove this for further disassembly.