Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #13

Edit by Philip Le Riche

Edit approved by Philip Le Riche

Before
After
Unchanged

Step Lines

[* blackyellow] Disengage two connectors on a small circuit board on the bottom of the 2nd hard disk bay and lift the screened cable off the bay.
[* green] Remove 2 6.5mm black screws. (On reassembly it's important to put these screws back in the right holes otherwise the front cover of the laptop won't fit.
[* black] Gently lift the motherboard from the right hand edge and disengage its connectors from their openings in the side of the laptop lower shell. You can now remove it completely.
[* blackyellow] Disengage two connectors on a small circuit board on the bottom of the 2nd hard disk bay and lift the screened cable off the bay.
[* green] Remove 2 6.5mm black screws. (On reassembly it's important to put these screws back in the right holes otherwise the front cover of the laptop won't fit.
[* black] Gently lift the motherboard from the right hand edge and disengage its connectors from their openings in the side of the laptop lower shell. You can now remove it completely.

Image 1

No previous image

Added