Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Remove the following five Phillips screws holding the lower support bracket in place:
[* red] Four 3.2 mm screws
[* orange] One 1.7 mm screw
[* icon_note] You may need to peel up the display adhesive acrosslining the lowerbottom edge of the iMac enclosure to access thesethe screws.
[* icon_note] You may need to peel up the display adhesive acrosslining the lowerbottom edge of the iMac enclosure to access thesethe screws.