Skip to main content

Changes to Step #11

Edit by Jake Devincenzi

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereLocate and remove the orange-ringed dipstick.
[* black] Wipe down the dipstick with a rag or towel to remove oil and ensure a valid reading.
[* black] Reinsert the dipstick all the way, then remove it.
[* black] Oil should cover the end of the dipstick, between the two small holes. The top hole is the maximum oil level, and the bottom is the minimum.
[* icon_note] Your reading may seem a little high after adding 5 quarts of oil, but oil has not yet seeped into all the nooks and crannies. For a more accurate reading, start the car, drive it around for a bit, park on a flat surface, then retake the reading.
[* icon_note] You can add or remove oil as you see fit
.
[* black] Insert wisdom hereLocate and remove the orange-ringed dipstick.
[* black] Wipe down the dipstick with a rag or towel to remove oil and ensure a valid reading.
[* black] Reinsert the dipstick all the way, then remove it.
[* black] Oil should cover the end of the dipstick, between the two small holes. The top hole is the maximum oil level, and the bottom is the minimum.
[* icon_note] Your reading may seem a little high after adding 5 quarts of oil, but oil has not yet seeped into all the nooks and crannies. For a more accurate reading, start the car, drive it around for a bit, park on a flat surface, then retake the reading.
[* icon_note] You can add or remove oil as you see fit
.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version