Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by jamesqb2001

Edit declined by Taylor Dixon

Before
After
Unchanged

Step Lines

[* black] While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2mm on the side of the display. Inserting the pick too far maydeeper than 2mm will damage the LCDbacklight assembly, LCD display, or touchscreen.
[* icon_caution] Do not use solvents to soften or release the adhesive, as they will enter between the screen layers and cause irreparable damage to the display
.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2mm on the side of the display. Inserting the pick too far maydeeper than 2mm will damage the LCDbacklight assembly, LCD display, or touchscreen.
[* icon_caution] Do not use solvents to soften or release the adhesive, as they will enter between the screen layers and cause irreparable damage to the display
.