Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* black] While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.
[* black] Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Image 1

No previous image

Added

Image 2

No previous image

Added