Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* black] Carefully place a suction cup halfway up the heated side.
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.
[* icon_caution] Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.