Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Cynthia Replogle

Edit approved by Cynthia Replogle

Before
After
Unchanged

Step Lines

[* black] Pull the hard drive away from the front edge of the mini and remove it from the outer case.
[* icon_note] During reassembly, there are two pins on the inside edge of the hard drive that fit into the case. The holes have rubber grommets around them, so it may be difficult to tell when you have seated the hard drive correctly.
[* icon_note] There are two pairs of holes in the case. Insert the pins into the holes closest to the bottom of the case.