Changes to Step #11
Edit by David Hodson —
Edit approved by David Hodson
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the backing from the double-sided tape and place the hard drive inside the iMac. | |
| [* black] Carefully set the drive into the iMac optical bay as close to the lower left corner as possible. | |
| [* icon_note] Do not to repeatedly stick and un-stick the tape, as the adhesive will become weaker. | |
| [* black] Once you are happy with the hard drive's placement, firmly press down along its edges to ensure full adhesion. | |
| - | [* icon_caution] Be careful to not cover the video card heat sink with the SATA cable! |