Changes to Step #11
Edit by David Hodson —
- Before
- After
- Unchanged
Step Lines
| - | [* red] Use the three coarse-threaded T10 Torx screws to attach your hard drive to the mounting points on the rear case of the iMac |
|---|---|
| + | [* black] Remove the backing from the double-sided tape and place the hard drive inside the iMac. |
| + | [* black] Carefully set the drive into the iMac optical bay as close to the lower left corner as possible. |
| + | [* icon_note] Do not to repeatedly stick and un-stick the tape, as the adhesive will become weaker. |
| + | [* black] Once you are happy with the hard drive's placement, firmly press down along its edges to ensure full adhesion. |
Image 1
Old Version
New Version
Image 2
No previous image
Added