Skip to main content

Changes to Step #3

Edit by Walter Galan

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Remove the heat sink from the logic board, minding any cables that may get caught.
+[* icon_note] If the heat sink appears to be stuck to the logic board after removing all screws, it may be helpful to use a spudger to separate the two components.
+[* icon_reminder] If you need to mount the heat sink back onto the logic board, we have a [guide|744|thermal paste guide] that makes replacing the thermal compound easy.