Skip to main content

Changes to Step #2

Edit by Evan Noronha

Edit approved by Evan Noronha

Before
After
Unchanged

Step Lines

[* blackred] Remove the three 10 mm T10 Torx screws securing the fan to the rear caseenclosure.
[* icon_note] OneThe uppermost screw has a rubber standoff adhered to its head—you can leavehead to support the display—leave this in place.
[* blackred] Remove the three 10 mm T10 Torx screws securing the fan to the rear caseenclosure.
[* icon_note] OneThe uppermost screw has a rubber standoff adhered to its head—you can leavehead to support the display—leave this in place.

Image 1

No previous image

Added