Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* black] Press down on theicon_note] The PRAM battery is secured by a spring contact and gently nudge ittwo small plastic nubs.
[* black] Gently push the battery
away from the two plastic clips holding it in place.
[* icon_note
nubs. (This puts increased pressure on the spring contact at the other end.)
[* black
] Once the PRAM battery is clear ofbattery's edge clears the two clipsnubs, tilt it will springup out of its housingsocket.
[* black] Press down on theicon_note] The PRAM battery is secured by a spring contact and gently nudge ittwo small plastic nubs.
[* black] Gently push the battery
away from the two plastic clips holding it in place.
[* icon_note
nubs. (This puts increased pressure on the spring contact at the other end.)
[* black
] Once the PRAM battery is clear ofbattery's edge clears the two clipsnubs, tilt it will springup out of its housingsocket.