Skip to main content

Changes to Step #31

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Remove the battery isolation pick.
[* black] Insert a plastic card underneath the logic board at the battery connector.
[* black] Slide the card all the way underneath the logic board, being sure to not slice into the volumeupper button ribbonassembly cable at at the edge of the iPad.
[* black] Slide the card all the way underneath the logic board, being sure to not slice into the volumeupper button ribbonassembly cable at at the edge of the iPad.