Skip to main content

Changes to Step #30

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom herean opening pick underneath the logic board at the corner of the large EMI shield.
[* black] Slide the pick upwards until you reach the battery connector to break up the adhesive holding the logic board in place
.
[* black] Insert wisdom herean opening pick underneath the logic board at the corner of the large EMI shield.
[* black] Slide the pick upwards until you reach the battery connector to break up the adhesive holding the logic board in place
.