Skip to main content

Changes to Step #13

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereUse tweezers to pull the XXX ribbon cable straight out of its ZIF connector.
[* icon_caution] There is very little give on this cable, so you may need to apply a decent amount of force. Be sure you are pulling the cable straight back, and not upward against the connector
.
[* black] Insert wisdom hereUse tweezers to pull the XXX ribbon cable straight out of its ZIF connector.
[* icon_caution] There is very little give on this cable, so you may need to apply a decent amount of force. Be sure you are pulling the cable straight back, and not upward against the connector
.