Skip to main content

Changes to Step #1

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* icon_caution] The following steps involve disconnecting many press connectors from their sockets on the logic board. When disconnecting these cables, be sure to pry up only on the connector, and not the socket itself.
[*
black] DisconnectUse the flat end of a spudger to disconnect the front-facing camera connector from its socket on the logic board.
[* icon_caution] The following steps involve disconnecting many press connectors from their sockets on the logic board. When disconnecting these cables, be sure to pry up only on the connector, and not the socket itself.
[*
black] DisconnectUse the flat end of a spudger to disconnect the front-facing camera connector from its socket on the logic board.