Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Minh

Edit declined by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* icon_note] Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.
[* black] Remove the following ten screws:
[* red] Two 9 mm 5-point Pentalobe screws
[* orange] Eight 2.6 mmM2 x 2mm 5-point Pentalobe screws
[* orange] Eight 2.6 mmM2 x 2mm 5-point Pentalobe screws
[* black] The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found [product|IF145-090|here].