Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #11

Edit by Jake Devincenzi

Pending approval

Before
After
Unchanged

Step Lines

[* black] SlidePlace the new filter over the threads where the old filter was.
[* black] Twist the filter clockwise to screw it into place. TightenUsing your hand, tighten it only until the filter is snug; do not over-tighten.
[* black] SlidePlace the new filter over the threads where the old filter was.
[* black] Twist the filter clockwise to screw it into place. TightenUsing your hand, tighten it only until the filter is snug; do not over-tighten.