Skip to main content

Changes to Step #6

Edit by Walter Galan

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Gently push the tip of a spudger under the black plastic flap stuck to the display data cable lock to make the lock pop upward and away from the socket.
[* black] While holdingRemove the lock awaysmall rubber gasket from the socket, use the tipcorner of a spudger and your fingers to gently remove the display data cable from its socket.
[* icon_caution] Do not pull upward on
upper case near the display data cable as you disconnect it, as its socket may break off the logic boardcable.
[* black] While holdingRemove the lock awaysmall rubber gasket from the socket, use the tipcorner of a spudger and your fingers to gently remove the display data cable from its socket.
[* icon_caution] Do not pull upward on
upper case near the display data cable as you disconnect it, as its socket may break off the logic boardcable.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added