Skip to main content

Changes to Step #1

Edit by Walter Galan

Pending approval

Deleted
Added
Unchanged

Step Lines

[* icon_reminder] Before proceeding, close your computer and lay it on a soft surface top-side down.
[* black] Remove the following ten screws:
[* red] Two 8 mm Torx Plus5-point Pentalobe screws
[* red] Two 8 mm Torx Plus5-point Pentalobe screws
[* orange] Eight 2.5 mm 5-point Pentalobe screws
[* icon_note] The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found [product|IF145-090|here].
[* icon_note] The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found [product|IF145-090|here].