Skip to main content

Changes to Step #11

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Push the upper case slightly toward the display assembly, then rotate it away from the front of the display assembly.
[* black] Once the two display hinges have cleared the upper case, remove the display and set it aside.
-[* icon_reminder] Keep track of the shims under each of the two display brackets. When installing the display, be sure a shim is installed under each display bracket (against the upper case) as shown in the third picture.

Image 1

No previous image

Added

Image 2

No previous image

Added