Skip to main content

Changes to Step #7

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* black] Peel up the six cable loops securing the antenna cables to the upper case.
[* black] Gently pull the cable loops slightly out of the channel cut into the upper case one at a time.
[* black] Use your spudger to open up the plastic loops as you de-route the antenna cables through them.
-[* black] Repeat this for all five retaining loops.
+[* black] Repeat this for all of the retaining loops.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added