Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Danis Terzi

Edit approved by Danis Terzi

Before
After
Unchanged

Step Lines

[* black] There is a visible separation between the front and the back of the device. Using a plastic wedgeopening tool, pry open the device along this separation. Then carefully pull apart the device by opening it up on the side that had the nameplate. Trying to open the device on the opposite side will rip the motherboard-display connector.
[* black] There is a visible separation between the front and the back of the device. Using a plastic wedgeopening tool, pry open the device along this separation. Then carefully pull apart the device by opening it up on the side that had the nameplate. Trying to open the device on the opposite side will rip the motherboard-display connector.