Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Danis Terzi

Edit approved by Danis Terzi

Before
After
Unchanged

Step Lines

[* blackicon_note] There is a visible separation between the front and the back of the device.
[* black]
Using a plastic opening tool, pry open the device along this separation. Then carefully pull apart the device by opening it up on the opposite side that hadof the nameplate.
[* icon_caution]
Trying to open the device on the opposite side will rip the motherboard-display connector.
[* blackicon_note] There is a visible separation between the front and the back of the device.
[* black]
Using a plastic opening tool, pry open the device along this separation. Then carefully pull apart the device by opening it up on the opposite side that hadof the nameplate.
[* icon_caution]
Trying to open the device on the opposite side will rip the motherboard-display connector.

Image 3

Deleted