Skip to main content

Changes to Step #1

Edit by Joseph O'Connor

Edit approved by Joseph O'Connor

Before
After
Unchanged

Step Lines

-[* black] Remove the 2 white flex-ribbon cables by pulling upward from each respective base.
-[* red] Remove the black flex-ribbon cable by pulling upward on the black tab, then pulling out the cable.
-[* orange] Remove the optical drive.
+[* red] Remove the 2 white flex-ribbon cables by pulling upward from each respective base.
+[* orange] Remove the black flex-ribbon cable by pulling upward on the black tab, then pulling out the cable.
+[* black] Remove the optical drive.