Skip to main content

Changes to Step #3

Edit by Andrew Bookholt

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Rotate the computer 90 degrees clockwise so the power receptacle faces you.
[* red] Remove the three 3 mm Phillips screws along the edge of the lower case.
[* icon_note] When replacing these screws, you must install each screwthem in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer.
[* icon_note] When replacing these screws, you must install each screwthem in the correct order. Begin by installing the screw closest to the display hinge, then work your way toward the front of the computer.

Image 1

Old Version

New Version