Skip to main content

Changes to Step #10

Edit by Matthew Vaught

Edit approved by Matthew Vaught

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereUse the flat side of the soldering iron to apply heat to the shrink tube until it tightens on the wire.
[* icon_note] Alternatively to using the soldering iron, you could also use a heat gun or hair dryer
.
[* black] Insert wisdom hereUse the flat side of the soldering iron to apply heat to the shrink tube until it tightens on the wire.
[* icon_note] Alternatively to using the soldering iron, you could also use a heat gun or hair dryer
.